Leaching of zinc and germanium from zinc oxide dust in sulfuric acid-ozone media

A new process of leaching zinc oxide dust by ozone oxidation in a sulfuric acid system was studied. The main factors affecting the leaching rate, such as ozone time, leaching temperature, initial acidity, leaching time, and liquid/solid mass ratio, were comprehensively investigated. The results show that leaching efficiency depends on all the above factors. The optimum conditions for leaching Zn and Ge from zinc oxide dust are as follows: ozone time 10 min, leaching temperature 90 ℃, initial acidity 160 g/L, leaching time 60 min, and liquid/solid mass ratio 7:1. Under the optimum conditions, the leaching rates of Zn and Ge are 95.79% and 93.65%, respectively. The leaching rates of zinc and germanium in the ozone leaching are 4.05% and 10.49% higher than those of the atmospheric leaching, respectively. Therefore, it is determined that ozone in solution plays a key role in rapidly oxidizing sulfide and releasing encapsulated germanium. Sulfuric acid-ozone media can efficiently extract Zn and Ge from zinc oxide dust.     

电感耦合等离子体原子发射光谱(ICP-AES)法和电感耦合等离子体质谱(ICP-MS)法测定大气降尘中的铅、镉、铬、锌、锰、镍、铜、铊

大气中Pb、Cd、Cr、Mn、Ni、Tl等重金属污染物是目前国内外城市大气污染的主要因子之一,研究大气降尘中重金属元素含量具有重大意义。本文采用盐酸-硝酸混合酸为消解体系,在105℃条件下用电热板消解回流大气降尘样品2小时后定容测定,通过电感耦合等离子发射光谱法仪(ICP-AES)和电感耦合等离子体质谱仪(ICP-MS)测定大气降尘中铅、镉、铬、锌、锰、镍、铜和铊等8种重金属元素。测定结果表明： ICP-AES(铅、镉、铬、锌、锰、镍、铜)和ICP-MS(铊)两种方法的曲线线性好,准确度高,测定范围宽,检出限在0.024mg/kg-0.548mg/kg之间,精密度在0.15%-2.38%之间,能准确测定大气降尘中的重金属元素含量。     

Effect of seasonal variation on dust samples of a winter fog affected urban environment of India,South East Asia

Physical and chemical characteristics of leaf dust (LD) samples, collected between 2011 and 2013, of a severely winter fog affected and polluted urban environment (Allahabad, India) of Indo-Gangetic plain are presented in this study. The weather changes in the study area are grouped into three effective annual seasonal periods – winter fog, pre-monsoon and post-monsoon. The pronounced impact of seasonal variations is observed in LD characteristics, as ~46% of the winter fog period samples ranges in size between 2.5 and 20 µm with high magnetic susceptibility (up to 938.22 × 10^?8 m³ kg^?1). In comparison, 35% of the LD from pre-monsoon period occurs in the size range of 100–300 µm with low magnetic susceptibility (up to 43.29 × 10^?8 m³ kg^?1). The fractal analysis involving submicroscopic clast dimension of LD also reveals a seasonal influence. The toxic metals (Pb, Zn, Cd, Cr and Ni) in LD belonging to winter fog and post-monsoon periods increase in comparison to samples from pre-monsoon time. Multivariate statistical analysis of trace element data suggests that the LD collected from winter fog and post-monsoon periods originate predominantly from anthropogenic source, whereas those collected during pre-monsoon owe their origin to crustal and anthropogenic sources, mainly. The present study has demonstrated the role of seasonal variation in controlling the physical and chemical properties of particulate matter based on multiple parameter analyses, and the derivation of the dust load from a mixed source (upper continental crust, anthropogenic and vehicular) for the study area for the first time.     

Switchable solvent based liquid phase microextraction of palladium coupled with determination by flame atomic absorption spectrometry

A switchable solvent-based micro-extraction method for pre-concentration and separation of ultratrace palladium was developed prior to its flame atomic absorption spectrometric detection. Reverse change of hydrophilicity of N,N-dimethylcyclohexylamine (DMA) was achieved by reaction with carbonated water. The hydrophilic bicarbonate salt of the protonated DMA was used as extractant for palladium complexed with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP). Formation of the hydrophobic form of switchable solvent from hydrophilic form of switchable solvent phase was achieved by addition of sodium hydroxide into the extractant-sample solution. The effect of key parameters affected extraction recovery was studied and optimised by using Plackett–Burman design, central composite design and three dimension (3D) surfaces response. The calibration plot was linear in the range 0.015–1.6 mg L^?1 of palladium with a correlation coefficient of 0.999. The limit of detections values of palladium for liquid and solid samples were 4.28 μg L^?1 and 0.54 µg g^?1, respectively. The pre-concentration factor was 37.5. The accuracy was confirmed by determination of palladium in certified reference material. The procedure was also applied for determination of palladium content of real samples as automotive catalytic converter, roadside dust, sea water and river water.     

The effect of external forces on the initial dissociation of RDX (1,3,5‐trinitro‐1,3,5‐triazine): A mechanochemical study

Experimental and theoretical studies have proposed different initiation reactions for the decomposition of hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX). Three primary reactions are considered to start RDX decomposition: homolytic N? N bond fission, HONO elimination, and concerted fission of C? N bonds. The focus of this article is to study the effect of external forces on the energy barrier and reaction energies of all three mechanisms. We used the Nudged Elastic Band method along with ab initio Density Functional Theory within the framework of a generalized force‐modified potential energy surface (G‐FMPES) to calculate the minimum energy paths at different compressive (corresponding to pressure between approximately 6 and 294 MPa) and expansive force values (between 10 and 264 pN). For all three reactions, the application of an expansive force increases the exothermicity and lowers the energy barriers to different extents, while a compressive force decreases the exothermicity and raises the energy barrier to different extents.     

RDX分子内振动能量重分配的动力学研究

基于从头算分子动力学(Born-oppenheimer molecular dynamics, BOMD)模拟, 构建了环硝胺六氢-1,3,5-三硝基-1,3,5-三嗪(RDX)单分子不同振动模式之间的耦合矩阵, 并计算了在不同加载能量下从低频振动模式到高频振动模式的最优能量传输路径. 结果表明, RDX单分子中—NNO₂基团更有利于能量局域化, 振动模式v₃和v₄在从低频振动模式到高频振动模式的能量传输过程中扮演着重要角色. 通过对v₃和v₄两个振动模式的进一步分析发现, 加载能量的不同会导致RDX单分子能量传输路径的不同. 当加载能量较低时, RDX单分子倾向于从低频振动模式到中频振动模式再到高频振动模式的能量传输路径; 当加载能量较高时, 能量更倾向于从低频振动模式直接传输到高频振动模式上. 揭示了RDX分子内振动耦合能量转移的微观机制, 为进一步探索RDX将“机械能”转化为“化学能”的微观过程提供了理论基础.     

球形封闭容器内一个简单的煤粉燃烧爆炸模型

在分析了大量球形封闭容器内煤粉燃烧爆炸实验数据基础上，考虑了煤粉燃烧爆炸机理所涉及的湍流燃烧、相变、各种化学反应动力学过程等复杂因素，并且对球形封闭容器内由于煤粉混合不均匀造成的燃烧不充分给予了考虑，得到了球形封闭容器内煤粉燃烧爆炸特征的数值计算结果，计算的压力－时间曲线与实验结果符合较好。     

添加剂与RDX的界面作用及对撞击感度的影响研究

研究了石蜡、硬脂酸等添加剂与RDX的界面作用及其对撞击感度的影响。得出添加剂对RDX(Hexogen)的铺展系数越大,钝感效果越好的结论,并获得了铺展系数与特性落高的经验函数关系。     

Experimental research on flame spectra of methane-coal dust explosions

The significance of experimental research on flame spectra of methane-coal dust explosions is explained. Weak explosions of methane-coal dust-air mixtures were carried out in a large-scale tube of Ø 200 cm×2900cm with one end open, and the absolute radiation intensities as well as their variation under different conditions for characteristic wavelengths of 0.8875, 1.000, 1.505, 2.801, and 4.346μm were obtained by using small angle of view and a multichannel detector developed by us. The experimental results are discussed and compared with those published abroad. Based on the absolute radiation intensity measured at wavelength 4.346μm and the selected blackbody radiation model, the temperature of explosion flame was determined. The results obtained are not only of great practical importance to the industry but may also be used in the study of flame and chemical kinetics.     

开放光程扬尘颗粒物浓度测量方法及系统

利用单波长激光通过扬尘空间发生散射消光衰减的特性,设计了开放光程的颗粒物浓度检测方法及系统。该方法利用双峰正态分布模型模拟颗粒物粒径分布,实时计算一定空间范围内的扬尘颗粒物浓度,具有响应速度快、测量动态范围宽的优点,适合浓度高、变化快、空间范围大的扬尘颗粒物浓度测量。通过水溶胶模拟实验与烟尘实验验证了该方法的可行性。实验数据表明,系统量程可达0~400mg/m3,分辨率为0.05mg/m3,响应时间小于1s。